Portal de Periódicos da CAPES

Integral model of dense gas plume dispersion

1986; Elsevier BV; Volume: 20; Issue: 7 Linguagem: Inglês

10.1016/0004-6981(86)90005-3

1878-2442

James A. Fay, Stephen G. Zemba,

Meteorological Phenomena and Simulations

The injection of a dense gas stream at ground level into a flowing turbulent atmosphere produces a wide, flat plume that entrains air primarily through its upper surface. A quasi-one-dimensional flow model of an isothermal dense gas plume is developed for the purpose of comparing experiments in wind tunnels and water flumes and field tests in the atmosphere. Comparisons are made for plume width, including the width at the source, and centerline ground plane source gas concentration. All published data are used in this comparison, which cover a factor of about 100 in plume length scale and Reynolds number. Tests conducted by different experimenters were found not to be dynamically similar. Dimensionless model parameters, all of order unity, are selected to give the best agreement among all the experimental data. The dependence of entrainment rate on the plume Richardson number, a key feature of the model, is confirmed in the comparison. The entrainment rate parameter is found to be larger for the field tests than for the laboratory experiments, reflecting the much higher Reynolds number of the former.