
The Unidirectional Valve Is the Best Method To Determine Maximal Inspiratory Pressure During Weaning
1999; Elsevier BV; Volume: 115; Issue: 4 Linguagem: Inglês
10.1378/chest.115.4.1096
ISSN1931-3543
AutoresPedro Caruso, Celena Freire Friedrich, Silvia DC Denari, Soraia AL Ruiz, Daniel Deheinzelin,
Tópico(s)Neonatal Respiratory Health Research
ResumoObjectives Although maximal inspiratory pressure (MIP) is used as an index of inspiratory muscular strength, there is no consensus on how to measure it. We compared, during weaning from mechanical ventilation, two methods of measurement to determine which shows the greater values (MIPbest) and is more reproducible. One method measured MIP when negative pressure was maintained for at least 1 s after a forceful expiration, and the other method measured MIP with a unidirectional expiratory valve (MIPuni). Design The study had a crossover design, and patients randomly performed three measurements of each method (t1). The procedure was repeated by the same observer after 20 min (t2). The maximal value in each method was considered. Setting ICU, Hospital A.C. Camargo, São Paulo, Brazil. Patients Fifty-four consecutive patients undergoing short-term mechanical ventilation who became eligible for the study when their physicians decided to restore spontaneous breathing. Results MIPbest values were arrived at using MIPuni 75% of the time either in t1 or t2. MIPuni yielded a higher average of MIPbest values in t1 and t2 (p < 0.0001). The effort-to-effort coefficient of variation of one method compared with the other during t1 and t2 was similar (p > 0.2 for t1; p > 0.8 for t2). Also, when comparing t1 and t2, the coefficients of variation were similar for each method (p > 0.62). Conclusions Because MIPuni displayed the maximal values, it is the best method for estimating MIP in patients undergoing short-term mechanical ventilation. The reproducibility of consecutive measurements was similar between the methods, even after a short period of time.
Referência(s)