Artigo Revisado por pares

Hydrothermal pretreatment of microalgae for production of pyrolytic bio-oil with a low nitrogen content

2012; Elsevier BV; Volume: 120; Linguagem: Inglês

10.1016/j.biortech.2012.06.007

ISSN

1873-2976

Autores

Zhenyi Du, Michael Möhr, Xiaochen Ma, Yanling Cheng, Xiangyang Lin, Yuhuan Liu, Wenguang Zhou, Paul Chen, Roger Ruan,

Tópico(s)

Catalysis and Hydrodesulfurization Studies

Resumo

Microalgae can be converted to an energy-dense bio-oil via pyrolysis; however, the relatively high nitrogen content of this bio-oil presents a challenge for its direct use as fuels. Therefore, hydrothermal pretreatment was employed to reduce the N content in Nannochloropsis oculata feedstock by removing proteins without requiring significant energy inputs. The effects of reaction conditions on the yield and composition of pretreated algae were investigated by varying the temperature (150–225 °C) and reaction time (10–60 min). Compared with untreated algae, pretreated samples had higher carbon contents and enhanced heating values under all reaction conditions and 6–42% lower N contents at 200−225 °C for 30–60 min. The pyrolytic bio-oil from pretreated algae contained less N-containing compounds than that from untreated samples and the bio-oil contained mainly (44.9% GC–MS peak area) long-chain fatty acids (C14−C18) which can be more readily converted into hydrocarbon fuels in the presence of simple catalysts.

Referência(s)
Altmetric
PlumX