Fabrication and Characterization of Tricalcium Silicate Bioceramics with High Mechanical Properties by Spark Plasma Sintering
2011; Wiley; Volume: 8; Issue: 3 Linguagem: Inglês
10.1111/j.1744-7402.2011.02613.x
ISSN1744-7402
AutoresHongbin Zhong, Lianjun Wang, Lingfeng He, Wan Jiang, Wanyin Zhai, Kaili Lin, Lidong Chen, Jiang Chang,
Tópico(s)Dental materials and restorations
ResumoInternational Journal of Applied Ceramic TechnologyVolume 8, Issue 3 p. 501-510 Fabrication and Characterization of Tricalcium Silicate Bioceramics with High Mechanical Properties by Spark Plasma Sintering Hongbin Zhong, Hongbin Zhong State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of China Graduate School of the Chinese Academy of Sciences, Beijing 100049, People's Republic of ChinaSearch for more papers by this authorLianjun Wang, Lianjun Wang State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Donghua University, Shanghai 201620, People's Republic of China * [email protected] Search for more papers by this authorLingfeng He, Lingfeng He Extreme Energy-Density Research Institute, Nagaoka University of Technology, Nagaoka 940-2188, JapanSearch for more papers by this authorWan Jiang, Wan Jiang State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of China † [email protected] Search for more papers by this authorWanyin Zhai, Wanyin Zhai State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of ChinaSearch for more papers by this authorKaili Lin, Kaili Lin State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of ChinaSearch for more papers by this authorLidong Chen, Lidong Chen State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of ChinaSearch for more papers by this authorJiang Chang, Jiang Chang State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of ChinaSearch for more papers by this author Hongbin Zhong, Hongbin Zhong State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of China Graduate School of the Chinese Academy of Sciences, Beijing 100049, People's Republic of ChinaSearch for more papers by this authorLianjun Wang, Lianjun Wang State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Donghua University, Shanghai 201620, People's Republic of China * [email protected] Search for more papers by this authorLingfeng He, Lingfeng He Extreme Energy-Density Research Institute, Nagaoka University of Technology, Nagaoka 940-2188, JapanSearch for more papers by this authorWan Jiang, Wan Jiang State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of China † [email protected] Search for more papers by this authorWanyin Zhai, Wanyin Zhai State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of ChinaSearch for more papers by this authorKaili Lin, Kaili Lin State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of ChinaSearch for more papers by this authorLidong Chen, Lidong Chen State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of ChinaSearch for more papers by this authorJiang Chang, Jiang Chang State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of ChinaSearch for more papers by this author First published: 24 March 2011 https://doi.org/10.1111/j.1744-7402.2011.02613.xCitations: 8 This work was funded by the Natural Science Foundation of China (Nos. 50625414, 50954002, 50821004), Program of Shanghai Subject Chief Scientist (No. 08XD14046), Shanghai Rising-Star Program (No. 09QA1406600), and Shanghai Nano Science and Technology Special Project (No. 0852nm03300). Read the full textAboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Abstract Bioactive tricalcium silicate ceramics (Ca3SiO5) were fabricated by spark plasma sintering (SPS), and their sinterability and mechanical properties were examined. The bioactivity and in vitro biocompatibility of Ca3SiO5 ceramics were evaluated. Ca3SiO5 ceramics show higher density and superior mechanical properties compared with those prepared by conventional pressureless sintering. In addition, hydroxyapatite was induced to form on the surface of Ca3SiO5 ceramics when soaked in simulated body fluid and bone marrow mesenchymal stem cells were attached and spread well on the ceramics. Ca3SiO5 ceramics fabricated by SPS possess excellent mechanical properties, bioactivity, and biocompatibility and are promising bone repaired materials. References 1 L. L. Hench, "Bioceramics—from Concept to Clinic," J. Am. Ceram. Soc., 74 1487– 1510 (1991). 2 L. H. Long, L. D. Chen, S. Q. Bai, J. Chang, and K. L. Lin, "Preparation of Dense Beta-CaSiO3 Ceramic with High Mechanical Strength and HAp Formation Ability in Simulated Body Fluid," J. Eur. Ceram. Soc., 26 1701– 1706 (2006). 3 L. H. Long, L. D. Chen, and J. Chang, "Low Temperature Fabrication and Characterizations of β-CaSiO3 Ceramics," Ceram. Int., 32 457– 460 (2006). 4 M. A. Encinas-Romero, S. Aguayo-Salinas, J. L. Valenzuela-Garcia, S. R. Payan, and F. F. Castillon-Barraza, "Mechanical and Bioactive Behavior of Hydroxyapatite–Wollastonite Sintered Composites," Int. J. Appl. Ceram. Technol., 7 164– 177 (2010). 5 P. Siriphannon, S. Hayashi, A. Yasumori, and K. Okada, "Preparation and Sintering of CaSiO3 from Coprecipitated Powder Using NaOH as Precipitant and Its Apatite Formation in Simulated Body Fluid Solution," J. Mater. Res., 14 529– 536 (1999). 6 K. L. Lin, W. Y. Zhai, S. Y. Ni, J. Chang, Y. Zeng, and W. J. Qian, "Study of the Mechanical Property and In Vitro Biocompatibility of CaSiO3 Ceramics," Ceram. Int., 31 323– 326 (2005). 7 Z. R. Gou, J. Chang, W. Y. Zhai, K. L. Lin, and Y. Zeng, "Study on In Vitro Bioactivity and Cytotoxicity of Gamma-Ca2SiO4 Ceramic," J. Inorg. Mater., 20 914– 920 (2005). 8 Z. R. Gou, J. Chang, and W. Y. Zhai, "Preparation and Characterization of Novel Bioactive Dicalcium Silicate Ceramics," J. Eur. Ceram. Soc., 25 1507– 1514 (2005). 9 W. Y. Zhao, J. Chang, J. Y. Wang, W. Y. Zhai, and Z. Wang, "In Vitro Bioactivity of Novel Tricalcium Silicate Ceramics," J. Mater. Sci.: Mater. Med., 18 917– 923 (2007). 10 W. Y. Zhao and J. Chang, "Two-Step Precipitation Preparation and Self-Setting Properties of Ticalcium Silicate," Mater. Sci. Eng. C, 28 289– 293 (2008). 11 W. Y. Zhao and J. Chang, "Preparation and Characterization of Novel Tricalcium Silicate Bioceramics," J. Biomed. Mater. Res., 73A 86– 89 (2005). 12 R. Kumar, K. H. Prakash, P. Cheang, and K. A. Khor, "Microstructure and Mechanical Properties of Spark Plasma Sintered Zirconia–Hydroxyapatite Nano-Composite Powders," Acta Mater., 53 2327– 2335 (2005). 13 K. A. Khor, K. H. Cheng, L. G. Yu, and F. Boey, "Thermal Conductivity and Dielectric Constant of Spark Plasma Sintered Aluminum Nitride," Mater. Sci. Eng. A, 347 300– 305 (2003). 14 Q. D. Hu, P. Luo, and Y. W. Yan, "Influence of Spark Plasma Sintering Temperature on Sintering Behavior and Microstructures of Dense Bulk MoSi2," J. Alloys Compd., 459 163– 168 (2008). 15 Y. W. Gu, N. H. Loh, K. A. Khor, S. B. Tor, and P. Cheang, "Spark Plasma Sintering of Hydroxyapatite Powders," Biomaterials, 23 37– 43 (2002). 16 Y. I. Lee, J. H. Lee, S. H. Hong, and D. Y. Kim, "Preparation of Nanostructured TiO2 Ceramics by Spark Plasma Sintering," Mater. Res. Bull., 38 925– 930 (2003). 17 A. Nakahira, M. Tamai, H. Aritani, S. Nakamura, and K. Yamashita, "Biocompatibility of Dense Hydroxyapatite Prepared Using An SPS Process," J. Biomed. Mater. Res., 62 550– 557 (2002). 18 A. G. Evans and E. A. Charles, "Fracture Toughness Determinations by Indentation," J. Am. Ceram. Soc., 59 371– 372 (1976). 19 T. Kokubo and H. Takadama, "How Useful is SBF in Predicting In Vivo Bone Bioactivity," Biomaterials, 27 2907– 2915 (2006). 20 J. Ringe, C. Kaps, B. Schmitt, K. Buscher, J. Bartel, and H. Smolian, "Porcine Mesenchymal Stem Cells—Induction of Distinct Mesenchyma Cell Lineages," Cell Tissue Res., 307 321– 327 (2002). 21 S. Y. Ni, L. Chou, and J. Chang, "Preparation and Characterization of Forsterite (Mg2SiO4) Bioceramics," Ceram. Int., 33 83– 88 (2007). 22 K. Mori, T. Fukunaga, Y. Shiraishi, K. Iwase, Q. Xu, and K. Oishi, "Structural and Hydration Properties of Amorphous Tricalcium Silicate," Cem. Concr. Res., 36 2033– 2038 (2006). 23 S. R. Radin and P. Ducheyne, "Plasma Spraying Induced Changes of Calcium–Phosphate Ceramics Characteristics and the Effect on In Vitro Stability," J. Mater. Sci.: Mater. Med., 3 33– 42 (1992). 24 S. Koutsopoulos, "Synthesis and Characterization of Hydroxyapatite Crystals: A Review Study on the Analytical Methods," J. Biomed. Mater. Res., 62 600– 612 (2002). 25 T. Kokubo, "Surface-Chemistry of Bioactive Glass–Ceramics," J. Non-Cryst. Solids, 120 138– 151 (1990). 26 P. J. Li, C. Ohtsuki, T. Kokubo, K. Nakanishi, N. Soga, and T. Nakamura, "Apatite Formation Induced by Silica–Gel in a Simulated Body-Fluid," J. Am. Ceram. Soc., 75 2094– 2097 (1992). 27 W. Y. Zhao, J. Y. Wang, W. Y. Zhai, Z. Wang, and J. Chang, "The Self-Setting Properties and In Vitro Bioactivity of Tricalcium Silicate," Biomaterials, 26 6113– 6121 (2005). 28 K. Anselme, "Osteoblast Adhesion on Biomaterials," Biomaterials, 21 667– 681 (2000). 29 J. Marchi, C. S. Delfino, J. C. Bressiani, A. H. A. Bressiani, and M. M. Marques, "Cell Proliferation of Human Fibroblasts on Alumina and Hydroxyapatite-Based Ceramics with Different Surface Treatments Dagger," Int. J. Appl. Ceram. Technol., 7 139– 147 (2010). Citing Literature Volume8, Issue3May/June 2011Pages 501-510 ReferencesRelatedInformation
Referência(s)