Portal de Periódicos da CAPES

A 1-V BiCMOS rail-to-rail amplifier with n-channel depletion mode input stage

1997; Institute of Electrical and Electronics Engineers; Volume: 32; Issue: 12 Linguagem: Inglês

10.1109/4.643659

1558-173X

R. W. Griffith, R.L. Vyne, R.N. Dotson, Tom Petty,

Advancements in Semiconductor Devices and Circuit Design

A BiCMOS rail-to-rail operational amplifier capable of operating from supply voltages as low as 1 V is presented. The folded cascode input stage uses an nMOS depletion mode differential pair to provide rail-to-rail common mode voltage range while typically requiring only 40 fA of input bias current. The bipolar transistor differential-to-single-ended conversion network employs a low-voltage base current cancellation technique which provides high input stage voltage gain from a l-V supply yet allows a 3-V//spl mu/s slew rate capability. The bipolar transistor output stage uses a low-voltage translinear loop which maintains a low impedance signal path to the output common emitter power devices. This circuit topology enables the amplifier to achieve a 4-MHz bandwidth with 60/spl deg/ of phase margin. The output voltage can swing to within 50 mV of each supply rail. An "on-demand" base current boost technique will be presented which can provide up to 50 mA of output drive capability from a 5-V supply, yet consumes only a few microamps when the output is in the quiescent state. A low voltage level shift technique will be described which uses an n-channel depletion mode source follower to provide isolation between the input and output stages.