Portal de Periódicos da CAPES

Mechanical properties of borate crosslinked poly(vinyl alcohol) gels

1981; Wiley; Volume: 26; Issue: 11 Linguagem: Inglês

10.1002/app.1981.070261134

1097-4628

A. T. Y. Cheng, Ferdinand Rodriguez,

Advanced Sensor and Energy Harvesting Materials

Abstract Boric acid does not introduce crosslinks in poly(vinyl alcohol) solutions, but gelation does occur in the presence of cations. In this experimental study, the dynamic mechanical properties of these gels were determined using test‐tube torsion pendulums and an air‐bearing torsion pendulum. The modulus at a fixed concentration of polymer and boric acid increases with increasing sodium ion concentration up to the point where the atom ratio of sodium to boron reaches 1. Higher sodium concentrations do not increase the modulus. The log decrement, on the other hand, decreases with increasing sodium concentration continuously without reaching a plateau at the equal atom ratio. Log decrements as low as 0.02 can be measured. The storage modulus depends on the logarithm of borate concentration and on the 4.7 power of poly(vinyl alcohol) concentration. Only a very small portion of the borates in solution take part in effective crosslinks. The activation energy for breaking individual bonds in a function of temperature and the cation to boron ratios. At a fixed cation concentration, this activation energy is more negative with increasing amount of boron ions due to a transformation of monomeric crosslinks into polymeric crosslinks, so that the storage modulus which measures crosslink density decreases as a temperature rises.