Portal de Periódicos da CAPES

Development of regionalized joint probability approach to flood estimation: a case study for Eastern New South Wales, Australia

2013; Wiley; Volume: 28; Issue: 13 Linguagem: Inglês

10.1002/hyp.9919

1099-1085

Wilfredo Caballero, Ataur Rahman,

Flood Risk Assessment and Management

Abstract Estimation of design flood in ungauged catchments is a common problem in hydrology. Methods commonly adopted for this task are limited to peak flow estimation, e.g. index flood, rational and regression‐based methods. To estimate complete design hydrograph, rainfall–runoff modelling is preferred. The currently recommended method in Australia known as Design Event Approach (DEA) has some serious limitations since it ignores the probabilistic nature of principal model inputs (such as temporal patterns (TP) and initial loss) except for design rainfall depth. A more holistic approach such as Joint Probability Approach (JPA)/Monte Carlo Simulation Technique (MCST) can overcome some of the limitations associated with the DEA. Although JPA/MCST has been investigated by many researchers, it has been proved to be difficult to apply since its routine application needs readily available regional design data such as stochastic rainfall duration, TP and losses, which are largely unavailable for Australian states. This paper presents regionalization of the model inputs/parameters to the JPA/MCST for eastern New South Wales (NSW) in Australia. This uses data from 86 pluviograph stations and six catchments from NSW to regionalize the input distributions for application with the JPA/MCST. The independent testing to three test catchments shows that the regionalized JPA/MCST generally outperforms the at‐site DEA. The developed regionalized JPA/MCST can be applied at any arbitrary location in eastern NSW. The method and design data developed here although primarily applicable to eastern NSW can be adapted to other Australian states and countries. Copyright © 2013 John Wiley & Sons, Ltd.