Portal de Periódicos da CAPES

In-service aging and degradation of 345 kV EPDM transmission line insulators in a coastal environment

2004; Institute of Electrical and Electronics Engineers; Volume: 11; Issue: 2 Linguagem: Inglês

10.1109/tdei.2004.1285906

1558-4135

R. Sundararajan, Alaa K. Mohammed, N. Chaipanit, Timothy Karcher, Zhenquan Liu,

Dielectric materials and actuators

Aging and degradation of 345 kV ethylene propylene diene monomer (EPDM) transmission line insulators removed from service is presented. These suspension type insulators were installed in a New Hampshire coastal area in 1995 and were removed in 2000 after unexplained outages in that structure. The purpose of this paper is to better understand the aging and degradation mechanisms of EPDM insulators in service. The insulators showed severe chalking and discoloration and partial loss of hydrophobicity on the side facing the sun. The surface structural changes were studied in detail using advanced surface analysis techniques, such as attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). For the first time, the significant differences in surface properties between the chalked/discolored (white) and the other surfaces (dark) were studied quantitatively. The Fourier transform infrared (FTIR) absorption spectra showed a significant decomposition of the CH groups of the white surface, elucidating the effect of photo-oxidation on the EPDM polymer. The SEM micrographs showed the cracking of the surfaces. The XPS spectra showed the formation of various polar carboxyl groups and the presence of high surface energy compounds, such as silica, and silicates. This study provided valuable basic information on the changes in the surface properties of EPDM insulators during service in a coastal environment.