Bragg Gratings Written in All->tex<$rm SiO_2$>/tex<and Ge-Doped Core Fibers With 800-nm Femtosecond Radiation and a Phase Mask
2004; Institute of Electrical and Electronics Engineers; Volume: 22; Issue: 1 Linguagem: Inglês
10.1109/jlt.2003.822169
ISSN1558-2213
AutoresStephen J. Mihailov, Christopher W. Smelser, Dan Grobnic, Robert B. Walker, Peixiang Lu, H. Ding, James F. Unruh,
Tópico(s)Advanced Fiber Laser Technologies
ResumoFemtosecond laser pulses at 800 nm and 120 fs were used to fabricate high-quality retroreflecting fiber Bragg gratings in standard Ge-doped telecom fiber (Corning SMF-28) and all-silica-core Fluorine doped cladding single-mode fiber using a deep-etch silica zero-order nulled phase mask. Induced index modulations of 1.9/spl times/10/sup -3/ were achieved with peak power intensities of 2.9/spl times/10/sup 12/ W/cm/sup 2/ without any fiber sensitization such as hydrogen loading. The fiber gratings have annealing characteristics similar to type II damage fiber gratings and demonstrate stable operation at temperatures as high as 950/spl deg/C. The grating devices exhibit low polarization dependence. The primary mechanism of induced index change results from a structural modification to the fiber core.
Referência(s)