Portal de Periódicos da CAPES

The DIP may take its final bows: The dual-in-line package, the reigning IC package for several generations, is losing position to newcomers for packaging advanced chips

1985; Institute of Electrical and Electronics Engineers; Volume: 22; Issue: 6 Linguagem: Inglês

10.1109/mspec.1985.6370492

1939-9340

Reed Bowlby,

Electromagnetic Compatibility and Noise Suppression

As the number of leads, or pins, on the dual-in-line package (DIP) increases, its size increases rapidly. DIPs are becoming up to 50 times bigger than the chips themselves, thus defeating the gains of miniaturization resulting from IC advances. A pin-grid array package with leads protruding from the bottom, can handle 256 leads in an area of about 3 square inches. New packages that are becoming available for integrated circuits are described, and the way in which these packages are attached to printed circuit boards is considered. Small-outline integrated circuits, plastic leaded chip carriers, ceramic leaded chip carriers, leadless ceramic chip carriers, and pin-grid arrays are covered. It is pointed out that if metal leads could be eliminated entirely, electrical signal delay and nonuniformity could be greatly reduced. A technique for doing this is tape-automated bonding in which chips may be applied directly to printed-circuit boards.