Mechanical properties of mortars containing recycled ceramic as a fine aggregate replacement
2015; Pontifical Catholic University of Chile; Volume: 14; Issue: 3 Linguagem: Inglês
10.4067/s0718-915x2015000300003
ISSN0718-915X
AutoresFrancisca Guadalupe Cabrera Covarrubias, S.P. Arredondo-Rea, José Manuel Gómez-Soberón, Jorge Luis Almaral Sánchez, Ramón Corral Higuera,
Tópico(s)Cultural Heritage Management and Preservation
ResumoWe study the behavior of mortars where 0%, 10%, 20%, 30%, 50% and 100% of their original natural sand was replaced by ceramic sand in a search of potential new building materials that will help to conserve natural resources and that are environmentally friendly.In this paper, the physical properties of the sands and their derived mortars, including their compressive strength, flexural strength, and shrinkage due to base and total drying, are characterized.Our results show that the compressive and flexural strengths of the recycled mortars decrease proportionally to the amount of natural sand replacement used.A similar behavior is observed for the shrinkage due to drying in mortars with low ceramic substitutions (10%, 20% and 30%).Based on these findings, we believe that the use of mortars made with recycled sand (with substitution contents lower than 30%) could be feasible in applications where the mechanical requirements are low.
Referência(s)