Portal de Periódicos da CAPES

Artigo Produção Nacional Revisado por pares

BIBTEX RIS

Mechanical Properties and Microstructural Characterization of Cobalt-Chromium (CoCr) Obtained by Casting and Selective Laser Melting (SLM)

2017; Trans Tech Publications; Volume: 899; Linguagem: Inglês

10.4028/www.scientific.net/msf.899.534

1662-9760

Marcello Vertamatti Mergulhão, Carlos Eduardo Podestá, Maurício David Martins das Neves,

Advanced materials and composites

The aim of this study is the consolidation of Cobalt-Chromium (CoCr) alloy powder using the additive manufacturing - selective laser melting (SLM) and the investment casting techniques. The research of this study has been applied to their biomaterial applied to development of prosthesis and dental implants. The gas atomized powder are spherical (mean diameter equal to 42,74 μm) and was analyzed by their physical and chemical properties. The microstructure of the powder and specimens was evaluated using optical microscope (OM) and scanning electron microscope with energy-dispersed X-ray spectroscopy (SEM-EDS). The mechanical properties were evaluated of standard samples using a tensile (yield strength, maximum tensile, rupture tensile and elongation), three point bending (transverse rupture strength) and micro hardness tests. The mechanical results indicate higher values for the SLM than casting specimens. The micrographs revealed a characteristic morphology of laser been used in the SLM technique and the dendrites in the casting technique. The microstructure of samples made by SLM is thinner than the samples obtained in the cast.