Portal de Periódicos da CAPES

Beam tuning and bunch length measurement in the bunch compression operation at the cERL

2017; Elsevier BV; Volume: 875; Linguagem: Inglês

10.1016/j.nima.2017.09.027

1872-9576

Y. Honda, Miho Shimada, Tsukasa Miyajima, Takahiro Hotei, Norio Nakamura, R. Kato, T. Obina, Ryota Takai, Kentaro Harada, Akira Ueda,

Gyrotron and Vacuum Electronics Research

Realization of a short bunch beam by manipulating the longitudinal phase space distribution with a finite longitudinal dispersion following an off-crest acceleration is a widely used technique. The technique was applied in a compact test accelerator of an energy-recovery linac scheme for compressing the bunch length at the return loop. A diagnostic system utilizing coherent transition radiation was developed for the beam tuning and for estimating the bunch length. By scanning the beam parameters, we experimentally found the best condition for the bunch compression. The RMS bunch length of 250±50 fs was obtained at a bunch charge of 2 pC. This result confirmed the design and the tuning procedure of the bunch compression operation for the future energy-recovery linac (ERL).