Compact readout system for chipless passive LC tags and its application for humidity monitoring
2018; Elsevier BV; Volume: 280; Linguagem: Inglês
10.1016/j.sna.2018.07.040
ISSN1873-3069
AutoresPablo Escobedo, Antonio Martínez-Olmos, José F. Salmerón, Almudena Rivadeneyra, L.F. Capitán‐Vallvey, A. Palma, Miguel Á. Carvajal,
Tópico(s)Advanced Sensor and Energy Harvesting Materials
ResumoThe development of a contactless readout system for High Frequency (HF) tags and its application to relative humidity monitoring is presented. The system consists of a Colpitts oscillator circuit whose frequency response is determined by a built-in logic counter of a microcontroller unit. The novel readout strategy is based on the frequency response change due to the inductive coupling between the coil of the Colpitts oscillator and the load impedance of a parallel LC resonator tag, as a result of the variation of the humidity sensing capacitor. The frequency is monitored with a low cost microcontroller, resulting in a simple readout circuit. This passive LC tag has been directly screen-printed on a humidity-sensitive flexible substrate. The readout circuit experimental uncertainty as frequency meter was 4 kHz in the HF band. A linear temperature drift of (-1.52 ± 0.17) kHz/⁰C was obtained, which can be used to apply thermal compensation if required. The readout system has been validated as a proof of concept for humidity measurement, obtaining a significant change of about 260 kHz in the resonance frequency of the Colpitts oscillator when relative humidity varies from 10% to 90%, with a maximum uncertainty of ±3% (±2 SD). Therefore, the proposed readout system stands as a compact, low-cost, contactless solution for chipless HF tags that avoids the use of bulky and costly equipment for the analog reading of wireless passive LC sensors.
Referência(s)