Portal de Periódicos da CAPES

Drilled Core Specimen Testing Method for Determination of Tensile Strength Values of Rock Materials

2018; Budapest University of Technology and Economics; Linguagem: Inglês

10.3311/ppci.12524

1587-3773

Eren Kömürlü, Serhat Demi̇r,

Rock Mechanics and Modeling

In this study, a new direct tensile strength determination method of drilled core specimen testing was investigated with numerical and experimental studies. Effect of different drill diameters of holes of the rock specimens was analysed to assess the ideal drill-hole design. The aim of drilling process is decreasing the failure load and stress concentration at the adhesive part to prevent invalid failures. Drilled specimens were determined to fail due to the start of cracking under the condition of uniaxial tensile stress distribution at sidewalls of holes. It was found that drill bits with the diameter of 11 mm is usable for a practical specimen drilling process to make a significant decrease in the failure load of the core specimens with the NX size (@54 mm) diameter. According to the results obtained from numerical and experimental analyses, an equation was suggested to determine uniaxial tensile strength values of drilled core specimens with the hole diameter of 11 mm.