Artigo Acesso aberto Produção Nacional Revisado por pares

Subsidence over room and pillar retreat mining in a low coal seam

2018; Elsevier BV; Volume: 29; Issue: 1 Linguagem: Inglês

10.1016/j.ijmst.2018.11.022

ISSN

2589-062X

Autores

André Cezar Zingano, Anderson Luís Weiss,

Tópico(s)

Rock Mechanics and Modeling

Resumo

The objective of this paper is to study the behavior of a low thick and low depth coal seam and the overburden rock mass. The mining method is room and pillar in retreat and partial pillar recovery. The excavation method is conventional drill and blast because of the small production. The partial pillar recovery is about 30% of the previous pillar size, 7 m × 7 m. The roof displacement was monitored during retreat operation; the surface movement was also monitored. The effect of the blasting vibration on the final pillar strength had been considered. Due to blasting, the pillar reduced about 20%. The consequence is more pillar deformation and roof vertical displacement. The pillar retreat and ground movement were simulated in a three-dimensional numerical model. This model was created to predict the surface subsidence and compare to the subsidence measured. This study showed that the remaining pillar and low seam reduce the subsidence that was predicted with conventional methods.

Referência(s)