Portal de Periódicos da CAPES

Determination of Johnson–Cook Constitutive Parameters for Cutting Simulations

2019; Multidisciplinary Digital Publishing Institute; Volume: 9; Issue: 4 Linguagem: Inglês

10.3390/met9040473

2075-4701

Michael Storchak, Philipp Rupp, Hans‐Christian Möhring, Thomas Stehle,

Engineering Technology and Methodologies

The Johnson–Cook constitutive equation is very widely used for simulating cutting processes. Different methods are applied for establishing parameters of the constitutive equation. Based on the methods analysed in this study, two algorithms were worked out to determine the constitutive parameters for the prevailing conditions during cutting processes. In the first algorithm, all constitutive parameters were established simultaneously with standardized test methods. In the second algorithm, the constitutive parameters were established separately in accordance with the cutting conditions prevailing in machining processes. The developed methodology was verified with AISI 1045 heat-treatable steel and Ti10V2Fe3Al (Ti-1023) titanium alloy. The two materials were examined in standardized tensile and compression tests with varying strain rates and temperatures. In addition, the kinetic characteristics of the orthogonal cutting process were established. Based on the results obtained by experiment and the algorithms developed, the constitutive parameters for the cutting conditions were calculated. The parameters were used to determine the material model for simulating the orthogonal cutting process. The algorithms developed were verified by comparing the simulated and experimentally determined kinetic cutting characteristics, which confirmed their good quality.