Portal de Periódicos da CAPES

Improving the mechanical and thermal properties of chlorinated poly(vinylchloride) by incorporating modified CaCO3nanoparticles as a filler

2019; Scientific and Technological Research Council of Turkey (TUBITAK); Volume: 43; Issue: 3 Linguagem: Inglês

10.3906/kim-1808-51

1303-6130

Abou El fettouh Abd El Moneim ABD EL-HAKIM, Ahmed Abd Allah HAROUN, Abdel Gawad M. Rabie, Gomaa A. M. Ali, Mohamed Yahia,

Polymer Nanocomposites and Properties

Chlorinated poly(vinyl chloride) (CPVC)/calcium carbonate nanocomposites were successfully prepared by the incorporation of calcium carbonate (CaCO$_{3})$ nanoparticles into the CPVC matrix. The compatibility between the two phases was obtained by surface modification of the CaCO$_{3}$ nanoparticles with stearic acid, leading to improved material performance. The effects of the addition of different amounts of CaCO$_{3}$ nanoparticles to the CPVC on the thermal, mechanical, and morphological characteristics of the CPVC/CaCO$_{3}$ nanocomposites were investigated. The thermal stability of the CPVC/CaCO$_{3}$ nanocomposites was evaluated by thermogravimetric analysis~and differential scanning calorimetry. In addition, the surface texture of the CPVC and the dispersion of the CaCO$_{3}$ were evaluated using scanning electron microscopy. Important enhancements in the thermal and mechanical properties of the modified CPVC/CaCO$_{3}$ nanocomposites were obtained by incorporating different amounts (2.00%, 3.75%, and 5.75%) of surface-modified CaCO$_{3}$ nanoparticles within the CPVC polymer matrix. The results reveal that 3.75% of CaCO$_{3}$ was the optimum amount, where the CPVC/CaCO$_{3}$ nanocomposite shows the highest impact strength, the highest tensile strength, the highest thermal stability, and the lowest elongation percentage$. $Replacement of the commercial impact modifier used in industry with the prepared surface-modified CaCO$_{3}$ nanoparticles for the development of CPVC was successfully achieved.