Portal de Periódicos da CAPES

Frequency-dependent acoustic energy focusing in hexagonal ceramic micro-scaffolds

2019; Elsevier BV; Volume: 92; Linguagem: Inglês

10.1016/j.wavemoti.2019.102417

1878-433X

Tomáš Grabec, Martin Koller, Petr Sedlák, Alena Kruisová, Benito Román‐Manso, Manuel Belmonte, P. Miranzo, Hanuš Seiner,

Ultrasonics and Acoustic Wave Propagation

Acoustic properties of an additive-manufactured SiC scaffold with hexagonal symmetry fabricated by the robocasting method are studied both numerically and experimentally. The numerical analysis is based on the finite element method (FEM) using Bloch boundary conditions. The calculations show both angular and frequency dispersion of the acoustic waves with wavelengths comparable to the spacing between the rods, i.e., on a millimeter scale, indicating interesting acoustic properties in the MHz range. The dispersion character leads to focusing of the energy propagation into the directions of the rods of the hexagonal structure. This is illustrated by modal-based calculations of the propagation of longitudinal and out-of-plane shear wave packets with a dominant wavelength. The experimental analysis consists of two steps, the measurement of the resonant spectrum and shear wave propagation character. The measured resonant spectrum is in good agreement with the one calculated using numerically obtained low-frequency properties of the structure, also showing the quality of the overall manufactured structure. The time-domain measurement shows significant changes in the energy propagation between low and high frequencies, as predicted by FEM calculations.