Turning cork by-products into smart and green materials for solid-phase extraction - gas chromatography tandem mass spectrometry analysis of fungicides in water
2020; Elsevier BV; Volume: 1628; Linguagem: Inglês
10.1016/j.chroma.2020.461437
ISSN1873-3778
AutoresMaría Celeiro, Lúa Vázquez, Meruyert Sergazina, Santiago Docampo, Thierry Dagnac, Vítor J.P. Vilar, Marı́a Llompart,
Tópico(s)Environmental Chemistry and Analysis
ResumoDuring stoppers production, large amounts of cork by-products (CBPs) are generated, being used as low-value material. This project aims to turn CBPs into smart, natural and sustainable materials (sorbent) for solid-phase extraction (SPE) of pesticides from water. The study describes the use of CBPs for the extraction of 17 fungicides (metalaxyl, cyprodinil, tolylfluanid, procymidone, folpet, fludioxonil, myclobutanil, kresoxim methyl, iprovalicarb, benalaxyl, trifloxystrobin, fenhexamid, tebuconazole, iprodione, pyraclostrobin, azoxystrobin and dimethomorph) followed by gas chromatography-tandem mass spectrometry (GC-MS/MS) analysis. The most critical parameters affecting SPE were optimized by experimental design methodology. Under the optimal conditions, the method was successfully validated in terms of linearity, repeatability, and intermediate precision. Fungicide recovery was assessed in different real water samples including river, fountain, rainwater and spring water at 3 concentration levels (0.1, 0.5 and 10 µg L−1). Recoveries ranged between 70-118% with RSD values lower than 20%, and matrix effects were not observed. Finally, the method was applied to samples from irrigation, rain, and river water, all collected in vineyards areas, revealing the presence of 10 of the 17 fungicides, at concentration up to hundreds of µg L−1. The use of CBPs seems to be a promising low-cost and ecofriendly alternative to be employed as sorbent in SPE techniques to extract fungicides from the aquatic environment.
Referência(s)