Artigo Acesso aberto Revisado por pares

Multi-Objective Optimization of Building Life Cycle Performance. A Housing Renovation Case Study in Northern Europe

2020; Multidisciplinary Digital Publishing Institute; Volume: 12; Issue: 18 Linguagem: Inglês

10.3390/su12187807

ISSN

2071-1050

Autores

Francesco Montana, Kai Kanafani, Kim Bjarne Wittchen, Harpa Birgisdóttir, Sonia Longo, Maurizio Cellura, Eleonora Riva Sanseverino,

Tópico(s)

Sustainable Building Design and Assessment

Resumo

While the operational energy use of buildings is often regulated in current energy saving policies, their embodied greenhouse gas emissions still have a considerable mitigation potential. The study aims at developing a multi-objective optimization method for design and renovation of buildings incorporating the operational and embodied energy demands, global warming potential, and costs as objective functions. The optimization method was tested on the renovation of an apartment building in Denmark, mainly focusing envelope improvements as roof and exterior wall insulation and windows. Cellulose insulation has been the predominant result, together with fiber cement or aluminum-based cladding and 2-layered glazing. The annual energy demand has been reduced from 166.4 to a range between 76.5 and 83.7 kWh/(m2 y) in the optimal solutions. The fact that the legal requirements of 70 kWh/(m2 y) are nearly met without building service improvements indicates that energy requirements can be fulfilled without compromising greenhouse gas emissions and cost. Since the method relies on standard national performance reporting tools, the authors believe that this study is a preliminary step towards more cost-efficient and low-carbon building renovations by utilizing multi-optimization techniques.

Referência(s)