Portal de Periódicos da CAPES

Ignition mechanisms of pulse detonator initiated scramjet cavity

2020; Elsevier BV; Volume: 38; Issue: 3 Linguagem: Inglês

10.1016/j.proci.2020.07.065

1873-2704

Daniel A. Rosato, Timothy Ombrello, Daniel R. Cuppoletti, Campbell D. Carter, Stephen D. Hammack, Kareem A. Ahmed,

Laser-Plasma Interactions and Diagnostics

A fueled cavity in a supersonic crossflow was ignited via a pulse detonator (PD) producing detonation waves that were then decoupled to produce varying degrees of shock-flame separation at the exit of the PD tube. This decoupling allowed for observation of the cavity ignition mechanism, and the key parameters required for successful cavity ignition were identified. Measurements were made using high-frame-rate OH Planar Laser-Induced Fluorescence (PLIF) and schlieren and chemiluminescence imaging. It was shown that the entrainment of high-temperature intermediate species into the forward region of the cavity, immediately behind the step, is the principal criterion for cavity ignition. Both coupled and slightly decoupled detonation cases induced significant OH shedding into the step region, leading to ignition and flame stabilization within the cavity. At conditions where OH shedding into the step region did not occur, cavity ignition was not observed. In coupled and slightly decoupled cases, there is more shedding of OH behind the step due to the greater disturbances created in the flowfield. As the degree of detonation decoupling increases, there is less shedding of OH and therefore a lower likelihood of ignition. Additionally, the time required for cavity combustion to reach its steady-state condition varied with the degree of decoupling of the detonation. Coupled detonation cases were shown to be more disruptive to the cavity and thus required more time to reach steady state than the decoupled cases.