Produção Nacional
Revisado por pares
Wood–cement boards with addition of coconut husk
2021; Taylor & Francis; Volume: 17; Issue: 6 Linguagem: Inglês
10.1080/17480272.2021.1914722
ISSN1748-0280
AutoresMaila Janaína Coêlho de Souza, Rafael Rodolfo de Melo, José Benedito Guimarães Júnior, Tatiane Kelly Barbosa de Azevêdo, Alexandre Santos Pimenta, Adriano Reis Prazeres Mascarenhas,
Tópico(s)Advanced Cellulose Research Studies
ResumoThe present work evaluates the production of wood–cement particleboards (WCBs) with addition of coconut-husk fibers. Trees of a Eucalyptus urophylla × Eucalyptus grandis hybrid were used as wood source. Boards were produced with addition of five coconut-fiber levels (0%, 10%, 20%, 30%, 40% and 50%) to replace the original wood, in a completely randomized design. From each board, specimens were taken to perform physical–mechanical tests (density, water absorption, thickness swelling, static bending, compression strength, and internal bond strength). The chemical characterization of the coconut fiber – in particular the total amount of extractives – in cold and hot water and an organic solvent, along with determination of lignin, holocellulose and ash amounts. The results showed that the addition of coconut fibers significantly affected the physical–mechanical properties of the boards. For the physical properties, the addition of coconut fibers improved the dimensional stability with the respective decrease in water absorption and thickness swelling. For mechanical properties, a decrease in the MOR and MOE was observed as the percentage of coconut fibers increased, most likely due to a poor interaction between the particles and the cementitious matrix. The resulting WCBs were suitable for nonstructural and indoor uses.
Referência(s)