Revisão Acesso aberto Revisado por pares

Potential of Soil Stabilization Using Ground Granulated Blast Furnace Slag (GGBFS) and Fly Ash via Geopolymerization Method: A Review

2022; Multidisciplinary Digital Publishing Institute; Volume: 15; Issue: 1 Linguagem: Inglês

10.3390/ma15010375

ISSN

1996-1944

Autores

Syafiadi Rizki Abdila, Mohd Mustafa Al Bakri Abdullah, Romisuhani Ahmad, Dumitru Doru Burduhos-Nergiș, Shayfull Zamree Abd Rahim, Mohd Firdaus Omar, Andrei Victor Sandu, Petrică Vizureanu, Syafwandi Syafwandi,

Tópico(s)

Geotechnical and construction materials studies

Resumo

Geopolymers, or also known as alkali-activated binders, have recently emerged as a viable alternative to conventional binders (cement) for soil stabilization. Geopolymers employ alkaline activation of industrial waste to create cementitious products inside treated soils, increasing the clayey soils' mechanical and physical qualities. This paper aims to review the utilization of fly ash and ground granulated blast furnace slag (GGBFS)-based geopolymers for soil stabilization by enhancing strength. Previous research only used one type of precursor: fly ash or GGBFS, but the strength value obtained did not meet the ASTM D 4609 (<0.8 Mpa) standard required for soil-stabilizing criteria of road construction applications. This current research focused on the combination of two types of precursors, which are fly ash and GGBFS. The findings of an unconfined compressive strength (UCS) test on stabilized soil samples were discussed. Finally, the paper concludes that GGBFS and fly-ash-based geo-polymers for soil stabilization techniques can be successfully used as a binder for soil stabilization. However, additional research is required to meet the requirement of ASTM D 4609 standard in road construction applications, particularly in subgrade layers.

Referência(s)