Portal de Periódicos da CAPES

Microwave-assisted infrared dry-peeling of beetroot: Peeling performance, product quality, and cell integrity

2022; Elsevier BV; Volume: 77; Linguagem: Inglês

10.1016/j.ifset.2022.102982

1878-5522

Clinton Emeka Okonkwo, J.O. Ojediran, Akpo V. Baribefe, Faith O. Ajao, Zhongli Pan, Adeola Arotile, E. C. Chukwuma, Chinedu A. Ogomegbum,

Postharvest Quality and Shelf Life Management

The use of low power-short time microwave (MW) treatment before infrared (IR) heating could help improve the peeling performance of beetroot. MW-assisted IR peeling (MWIR) and IR peeling of beetroot were investigated and compared with the conventional hot-lye peeling method. Also, the effects of these peeling methods on the quality and microstructure were evaluated. Hot-lye peeling at 95 °C for 40 s and 60 s was used as control. Results showed that MW-assisted IR peeling at power 640 W and heating time 7 min produced samples with the highest peelability (99.4%), lowest peel thickness (0.075 mm), and peel remaining (0.8%), lower peeling loss (4.23 g), and better peeling easiness when compared with lye peeling and IR peeling. IR peeling alone produced samples with the lowest peeling loss (2.87 g) and surface colour change, and the highest vitamin C retention (75.32%) than MW-assisted IR and lye peeling respectively. The product microstructure for the different peeling methods showed cellular distortion as a result of thermal expansion. MW pretreatment shows a promising potential to further develop the IR dry-peeling method, to replace the conventional hot lye chemical peeling.