Portal de Periódicos da CAPES

BIO-PRINTING OF FEMUR MODEL: A BONE SUBSTITUTE FOR BIOMEDICAL RESEARCH

2023; Institute of Metals and Technology; Volume: 57; Issue: 3 Linguagem: Inglês

10.17222/mit.2023.831

1580-3414

A. Vasanthanathan, Senthil Maharaj Kennedy,

Orthopedic Infections and Treatments

This paper deals with the development of a medical support model that can be used as a prototype to study the anatomy of the femur and for biomechanical research experimentation related to bone plates. CT scan data of the femur bone are converted into a 3D model using MIMICS software and imported into a finite-element model for analysis. The materials selected for the fabrication of the femur model were PEEK and CF PEEK (infused with chopped carbon fibre). The femur bone model was analysed using ANSYS® WORKBENCH® 2021 R2 with different material properties. By conducting a subsequent FE analysis, the optimal material was finally arrived at. Using 3D-printing technology, the 3D model of the femur was fabricated by using a material spool with better properties suited for the femur bone. The FE results were compared with the experimental results of the fabricated femur model and the results of the CF PEEK bone model closely matched the properties of real human femur, and it can be used as a femur bone substitute for biomechanical investigations of bone plates instead of using a real femur.